Engine Service Tools

GO426 - Multi-Stage Injector Puller Kit For M9R 2.0 DCI Engines This multi-stage injector puller kit is designed for the removal of injectors on M9R 2.0 dCi engines found in Renault, Nissan, and Opel vehicles. Engineered to handle a wide range of injector failures, the kit provides multiple extraction methods depending on the condition of the injector - whether seized, broken, or partially disassembled. It can be used for mechanical extraction or with an optional mechadraulic cylinder for increased pulling force. The extraction frame and support columns are specifically designed to match the engine layout, ensuring secure mounting and efficient operation. This reduces removal time and helps avoid the need to remove the cylinder head. Key Features Designed for M9R 2.0 dCi engines (Renault, Nissan, Opel) Multi-stage system handles various injector failure scenarios Suitable for removing seized, broken, or partially dismantled injectors Can be used mechanically or with optional mechadraulic cylinders (GO1010 / GO1020) Engine-specific frame ensures secure mounting and accurate alignment Reduces operation time and minimises need for cylinder head removal Applications: Injectors: Bosch Piezo, Bosch CR on Renault, Nissan & Opel Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025 

Read more less

GO537 - Injector Extractor Kit 2.0 Diesel M9R Heavy-duty injector extractor kit designed for the removal of seized, damaged, or broken injectors on M9R 2.0 diesel engines. The system allows extraction in multiple configurations, using mechadraulic force, while the engine-mounted frame ensures secure alignment and controlled operation. Extraction of the injector with electrical connector Extraction of the injector without electrical connector Extraction of the broken injector  Specification Force: 12 ton (Mechadraulic cylinder)  Stroke: 8 mm Dimensions: Ø80x260x45 mm Pressure: max. 700 Bar Hole: Ø21.5 mm Driving torque: 56 Nm Weight: 1,65 kg Grease temperature range of use: from -25°C to 80°C  Material: aluminium  Adaptors: M10/M12/M14/M16/M18  Applications Brand Renault, Nissan, Opel Motor 2.0 diesel Engine code M9R Injectors Bosch CR, Bosch Piezo Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO434 - Ford EcoBlue Injector Removal Set Specialist injector removal set designed specifically for Ford 2.0L EcoBlue engines. Enables the safe extraction of seized injectors without dismantling the cylinder head, reducing repair time and risk of damage. Key Features Designed for Ford 2.0L EcoBlue diesel engines Allows removal of seized injectors without cylinder head removal Reduces risk of injector and engine damage during extraction Enables in-situ operation for improved workshop efficiency Supplied with model-specific adaptors and tooling Injector extraction: Complete extraction of injector with a special fork Advantage: It is not necessary to replace the injector; it can be reused Partial extraction of injector with special tools included in the set  Applications: Ford 2.0 Eco Blue - engines from 2016 in Galaxy/S-Max/Mondeo/Focus C-Max/Transit and Custom (from 2018) etc. Engine codes: YLFS 77 kW “ YLF6 77 kW “ YMFS 96 kW “ YMF6 96 kW “ YNFS 125 kW “ YNF6 125 kW “ YLR6 77 kW “ YMR6 96 kW “ YNR6 125 kW For particularly tight injectors, do not use the fork extractor, we recommend the use of our hollow piston mechadraulic cylinder of 12 tonnes; GO1015 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

The set contains 4 adapter sockets to disassemble the nozzle head with electrical connection along with 3 clutch adapters for jet screw threading operation As soon as the nozzle head and jet needle are disassembled, traction adapters can be screwed in for disassembly with the slide hammer or bridge and the hydraulic cylinder The particularly slim shape allows access even with very close injectors  Applications Universal use e.g. for BMW, Mercedes, Peugeot, Citröen, Ford, Renault, Nissan, etc.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

New modular system - the master kit contains the basic kit required to be able to use each specific module; as well as each modular component for M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 glow plugs Quick and easy removal - also allows the user to restore the thread for installation of the new glow plug Special sockets and milling cutters for the breaking and controlled removal of the glow plugs central electrode Sliding rod, extension and slide hammer to remove the stuck glow plus residues in the glow plugs seat Specifications: Dimension  14mm (M10) Dimension  20mm (M9, M8) Dimension  13mm L (thread) Applications: M8x1: Mercedes, Smart, VW, Fiat, Opel, Ford etc. M9x1: Opel, Fiat, Alfa, Lancia (e.g. 1.3-2.3-3.0 JTD) etc. M10x1: VW, Audi, Mercedes, BMW, Opel, PSA, Renault, Ford, Suzuki etc. M10x1,25: VW, Audi, Toyota, Suzuki, Opel, Isuzu, Mercedes etc. Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

To aid the removal of seized / stubborn Denso injectors Parts of the kit can be mounted together around an injector creating a stable mount for the slide hammer to fix onto Compact slide hammer allows for use on an engine in-situ Suitable for Toyota, Nissan, Mazda, Opel / Vauxhall and Lexus Denso Injectors: 23670 - 30080 MB416600 - MB40A 5870 - 13H50B 11L 12182 23670 - 26011 23670 - 0R050 10J 06798   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows for the removal of tightly fixed injector nozzles and injectors on MERCEDES 2.1 L, 2.2 L,3.0 V6 and 3.0 V6 and CHRYSLER 3.0 V6 without removal of the cylinder head Compact mechadraulic cylinder allows for use in confined spaces e.g where injector is under bulkhead Engine removal not required Includes 12 tonne Mechadraulic Cylinder Injectors: Bosch (2.1L / 2.2L), Delphi (3.0) Chrysler: 300 C Mercedes: Vito, Vario, CLK, Sprinter, Viano, Class: M, GL, C, GLK, E, CLS, S, R and G Engines: CDI 2.1 L, 2.2 L, 3.0 V6   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Universal Glow Plug Tip Extraction Set - Master M8X1-M9X1-M10X1-M10X1,25. Double Pulling System For the extraction of the electrode terminal part of the glow plugs (M8, M9, M10) in the event of breakage or sticking inside the seat port, which is otherwise impossible to remove. The set includes all the tools needed to safely remove the terminal part of the glow plug electrode without damaging the cylinder head. This operation can be completed with a slide hammer or threaded extractor.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Can be used with any current diesel engines using threading sizes M8 x 1, M9 x 1, M10 x 1, M10 x 1.25 When extracting glow plugs, the glow plug tip (glow tube) often breaks and remains stuck in the cylinder head. The broken glow plug tips can be easily extracted with the help of this kit. The set of tools contains all of the tools needed to tap resilientthreading into the end of the glow plug. Afterwards the glow plug tip will be extracted with the help of the extraction rod and a striking hammer. The drill will be guided precisely using the glow plug threading in the cylinder head. This will avoid any damage to the cylinder head. This set can be used with any current diesel engines using threading sizes: M8 x 1, M9 x 1, M10 x 1 and M10 x 1.25. Drilling tips implemented and reinforced for new ceramic glow plugs.  Applications: Citroen/Peugeot: 1.4, 1.6L HDI Ford: 1.4, 1.6L TDCI Mazda: 1.4 CD Suzuki: 1.4L DDIS Toyota: 1.4 HDI Volvo: 1.6D, etc.  Components: 1 x core hole drill extension with a diameter of 2.5 for M8 x 1 and M9x1 1 x core hole drill extension with a diameter of 3.2 for M8 x 1 (special application) 1 x core hole drill extension with a diameter of 3.2 for M10 x 1 and M10 x 1.25 1 x M3 core hole drill extension for M8 x 1 and M9 x 1 1 x M4 thread tap extension for M8 x 1 (special application) 1 x M4 thread tap extension for M10 x 1 and M10 x 1.25 1 x M3 extra long extraction rod with cap nut for M8 x 1 and M9 x 1 1 x M4 extra long extraction rod with cap nut for M8 x 1 (special application) 1 x M4 extra long extraction rod with cap nut for M10 x 1 and M10 x 1.25 1 x striking hammer, weight 400g 1 x tap guide for M8 x 1 glow plug threads 1 x tap guide for M9 x 1 glow plug threads 1 x tap guide for M10 x 1 glow plug threads 1 x tap guide for M10 x 1.25 glow plug threads   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

For removing damaged and broken glow plugs from cylinder heads by effectively gripping the hex body of all types of M8, M9 and M10 glow plugs Slide hammer assists in removal of glow plug and avoids damage to the cylinder head Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO490 - Vibrofighter Universal Vibration Tool RRP £577.52 Supplementary set to remove injectors The tool acts directly through vibrations and impulses on the extraction tie rod installed on the injector It has been designed to fully remove the injector from its seat without damaging the cylinder head and without breaking the injector, which would leave residues inside the head Usable on almost all the injectors on the market (with and without hammer) Equipped with a small regulation valve with adjustable vibration intensity system according to the application Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

For powerful expulsion of stuck components as well as for body straightening work.  The new slide hammer version is filled with a steel shot. This prevents the weight from bouncing back against the abutment. The impact intensity is thus increased because the full impact force is transmitted to the component to be machined.  This version is also very gentle on the joints and allows fatigue-free working.  Technical data Weight: 3Kg Total length: 580mm Connection - Thread: M18x1.5 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO507 - Master Slide Hammer Injector Set with CR Adaptors Comprehensive injector extraction kit designed for the removal of diesel injectors using slide hammer force. Supplied with a range of common rail adaptors, the system allows injector removal without dismantling the cylinder head, providing a versatile solution for multiple injector types and applications. Key Features Suitable for removal of diesel injectors across multiple systems (Bosch, Denso, Siemens) Slide hammer operation provides controlled pulling force Includes CR adaptors (M12x1.5 and M14x1.5) for common rail applications Allows removal without dismantling the cylinder head Multiple extraction methods  Using the pliers with holding arms perfectly fitting to the shape of the injector Using the articulated joint adapter and the pivot, that has to be screwed to the fitting of the Common Rail duct. Using the special socket (for Bosch CR). Applications Injectors: Denso, Bosch, Siemens Use on Pump Düse injectors. Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

14 piece special centering tool set for vehicles without pilot bearings in the crankshaft Ensures proper installation of the self-adjusting clutch whilst avoiding erratic adjustment of the adjusting ring in the clutchs mechanisms to provide smooth clutch operation. 3-arm truss for flywheels with six mounting screws and 4-arm truss for flywheels with eight mounting screws.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Self Adjusting Clutch (SAC) Installer Kit For dis-mounting and mounting SAC Clutch Assemblies to the flywheel Approved Clutch Manufacturers method for SAC clutches Applications include: Alfa Romeo, Audi, BMW, Fiat, Ford, Mercedes, VW and more Wide applications coverage for 120° (3 screw) SAC clutch assemblies Allows Pressure Plate to be pre-tensioned before removal and re-fitting of clutch Avoids clutch plate distortion and accidental damage due to incorrect fitting and subsequent vibration and shortening of clutch life   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO903 - DSG Clutch Removal Kit VW Group RRP £616.97 The tool set for the disassembly and assembly of the DSG (Direct-Shift Gearbox) is designed to remove the clutch casing, including the discs, of 6-speed (code 08D) and 7-speed (code 0AM) VAG gearboxes, dual clutches (K1 and K2) and multiple shafts used in cars of the VAG Group from 2004 to 2012. Includes pliers to remove/install the main shaft safety ring. AUDI applicationModels: A3 SEAT applicationModels: Altea, Altea XL, Ibiza, Leon, ToldeoSKODA applicationModels: Fabia, Octavia, Roomster, Superb, YetiVW applicationModels: Golf, Golf Plus, Jetta, Passat, Polo, Scirocco, Touran   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Universal pneumatic tool for assembling and disassembling engine valves, suitable for all types of valves on petrol and diesel engines. Practical and easy to use, saving up to 60 - 70% time, especially during valve assembly. Made for engines with 4/5 cylinder valves. This kit includes 3 adaptors for valves assembly and, overall, 8 reduction rings suitable to the adaptors, from 19.8 to 50 mm. This kit can therefore be used universally for small and large valve plates, from cars to vans. The open shape of the mounting adapters allows easy access to the valve plate and to the cones, by means of which the semi-cones of multivalve engines can also be easily worked. The lightweight, maneuverable, high strength aluminium chassis is equipped with a precisely controllable pneumatic cylinder.  Technical data: CE approved machine in compliance with 2006/42/CE (Machine Directive). Case Dimensions: 485x375x135 mm Machine weight: 6 Kg Working pressure: min 6 bar, max 10 bar Power: 6 bar=118 Kg, 10 bar=196 Kgf Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Universal pneumatic tool for assembling and disassembling engine valves, suitable for all types of valves on petrol and diesel engines. Practical and easy to use, saving up to 60 - 70% time, especially during valve assembly. Made for engines with 4/5 cylinder valves. This kit includes 3 adaptors for valves assembly and, overall, 8 reduction rings suitable to the adaptors, from Ø 19.8 to 50 mm. This kit can therefore be used universally for small and large valve plates, from cars to vans. The open shape of the mounting adapters allows easy access to the valve plate and to the cones, by means of which the semi-cones of multivalve engines can also be easily worked. The lightweight, maneuverable, high strength aluminium chassis is equipped with a precisely controllable pneumatic cylinder.  Technical data: CE approved machine in compliance with 2006/42/CE (Machine Directive). Case dimensions: 485x375x135 mm Machine weight: 5 Kg Working pressure: min 6 bar., max 10 bar Power: 6 bar=75 Kg, 10 bar=125 Kgf Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Operates on springs from 19 mm to 50 mm (3/4" to 2") diameter. Quick and precise adjustment in millimeter increments with locking handle. 90 mm (3" ½) cylinder stroke to provide compression of any spring type whilst protecting the user. Only 6 bar (90 psi) of compressed air required to operate. With a working pressure of 10 bar (145 psi) the Spring Compressor force is 500 Kgf (1.102 lbf). Light alloy and nylon resin with fibreglass cylinder composition to avoid corrosion and oxidisation.  Heavy-duty CNC-machined frame made of quality steel. The drive valve can function only when the Spring Compressor is connected to the compressed air system. Consequently the machine can be disconnected while the spring is compressed without danger, for maximum safety. This kit contains 3 adapters for the assembly of valves. Can be used universally for small and large valve plates, from cars to vans. The open model of the mounting adapters allows easy access to the valve plate and cones. The reinforced chassis is made with a rectangular steel tube and is equipped with a precisely controllable pneumatic cylinder.  Technical data: Dimensions: 630x300x95 mm Pack dimensions: 485x375x185 mm Machine weight: 7,2 Kg Pressure: min 6 bar, max 10 bar Power: 10 bar=500 Kgf CE approved machine in compliance with 2006/42/CE (Machine Directive) Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows application of up to 12 tons of mechadraulic force which can be used to provide a controlled force in place of the mechanical effort required when using the GO410 / GO426 Technical data: Dimensions:  80 x 55 mm Stroke:  8 mm Driving torque:  67Nm Weight:  2.5 Kg Hole:  21.5 mm  Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Technical data Force: 12ton Stroke: 8 mm. Dimensions: 80x55 mm Pressure: max. 700 Bar Hole: 21.5 mm Connection: 3/8" -18 NPT Material: steel   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO1015 - Mechadraulic Cylinder & Adaptor Kit 12 Tonne Mechadraulic cylinder and adaptor kit designed to deliver high-force extraction and installation across a wide range of workshop applications. Combining hydraulic power with mechanical control, the system provides a compact and efficient solution for loosening tight components, injector removal, and hub installation. Key Features 12 tonne mechadraulic cylinder for high pulling force Combines hydraulic force with mechanical control for precision Lightweight aluminium construction with high strength Includes adaptors (M10, M12, M14, M16, M18) for multiple applications Suitable for injector removal, hub installation, and general workshop use Compact design with multiple mounting points for secure operation Specification Force: 12 Tonnes Stroke: 8 mm Body dimensions: 98 x 80 x 50(h) mm Pressure: max. 700 Bar Hole: Ø 21,5 mm Driving torque: 56Nm Weight: 1,65 Kg Grease temperature range of use: from -25°C to 80°C Material: aluminium Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Force: 17tonnes Stroke: 43 mm Dimensions: 90x155 mm Pressure: max. 700 Bar Hole: 20 mm Connection: 3/8" -18 NPT Outside connection thread: 2" 3/4-16 UN Material: steel   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Allows application of up to 20 tons of hydraulic force which can be used to provide a controlled force in place of the mechanical effort required when using the GO410 / GO426 Technical data: Dimensions:  100 x 60 Stroke:  8 mm Pressure:  700 Bar Weight:  3,04 Kg Hole:    33 Coupling connection thread 3/8" -18 NPT Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Provides up to 32 tons of controlled hydraulic force Dimensions: 104 x 261 mm Stroke: 50 mm Pressure: max. 700 Bar Hole: 21.5 mm Connection: 3/8" -18 NPT Inner thread: M24 x 2 Outside connection thread: 2" 3/4-16 UN Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO1050 - Hydraulic Cylinder - Aluminium 12 Tonne Compact hydraulic cylinder designed to deliver high pulling force for extraction and installation tasks. Suitable for injector removal, bearing and hub work, and releasing seized components, it provides controlled hydraulic power in a lightweight aluminium body. Key Features 12 tonne hydraulic force for high-load applications Suitable for injector, bearing, hub and silent block operations Ideal for releasing tight or seized mechanical components Lightweight aluminium construction for ease of handling Supplied with threaded adaptors (M10, M12, M14, M16, M18) for versatility Compact design with 8 mm stroke for controlled operation Specifications Force: 12 Tonnes Stroke: 8 mm Dimensions: 80 x 50 mm Pressure: Max. 700 Bar Hole: 21.5 mm Connection: 3/8"-18 NPT Material: Aluminium Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

The mechanical properties, the shape and dimensioning for which they were designed, ensure that Govoni hydraulic cylinders have a field of use to the automotive industry as: Injector disassembly; Bearing, hub and silent block disassembly; Coaxial unlocking of very tight mechanical components. Equipped with 5 threaded bushes in order to fit the most relevant threaded bars on the market. Specifications Provides up to 12 tons of controlled hydraulic force Dimensions: 90 x 155 mm Stroke: 43 mm Pressure: max. 700 Bar Hole: 20 mm Connection: 3/" -18 NPT Mounting Thread: 2 3/4-16 UN Adaptors: M10/M12/M14/M16/M18 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO1061 - Hydraulic Cylinder - Aluminium 17 Tonne Heavy-duty hydraulic cylinder designed to deliver increased pulling force for demanding extraction and installation tasks. Suitable for injector removal, bearing and hub work, and releasing tightly seized components, it provides controlled hydraulic power in a lightweight aluminium body. Key Features 17 tonne hydraulic force for high-load applications Suitable for injector, bearing, hub and silent block operations Ideal for releasing very tight or seized mechanical components Lightweight aluminium construction for improved handling Supplied with threaded adaptors (M10, M12, M14, M16, M18) for versatility 43 mm stroke for extended working range Specifications Force: 17 Tonnes Dimensions: 90 x 155 mm Stroke: 43 mm Pressure: max. 700 Bar Hole: 20 mm Connection: 3/" -18 NPT Mounting Thread: 2 3/4"-16 UN Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

The mechanical properties, the shape and dimensioning for which they were designed, ensure that Govoni hydraulic cylinders have a field of use to the automotive industry as: Injector disassembly; Bearing, hub and silent block disassembly; Coaxial unlocking of very tight mechanical components. Equipped with 5 threaded bushes in order to fit the most relevant threaded bars on the market. Specifications Provides up to 32 tons of controlled hydraulic force Dimensions: 104 x 261 mm Stroke: 50 mm Pressure: max. 700 Bar Hole: 21.5 mm Connection: 3/8" -18 NPT Inner thread: M24 x 2 Outside connection thread: 2 3/4-16 UN Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO441 - CH.29 & CH.30 Bosch Injector Removal Socket Specialist socket designed for the removal of Bosch injectors (CH29 and CH30) without dismantling. The tool engages beneath the electrical connection fixing nut, allowing the injector to be removed intact while avoiding damage to the plastic connector. Key Features Suitable for Bosch injectors (CH29 and CH30) Allows removal without opening or dismantling the injector Engages under electrical connection fixing nut for secure hold Ensures complete removal of the injector without removing the plastic electrical connection Ensures clean, controlled extraction of the injector Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO455 - Injector Removal Fork - Ford 2.0 Ecoblue TDCi Injector removal fork designed for use with Ford 2.0 EcoBlue TDCi engines. Used in conjunction with GO434, it allows the injector to be released using forked leverage, providing a simple and controlled removal method where access permits. Please note - not suitable for use on seized injectors Applications Ford 2.0 ecoblue TDCI from 2016 Ford Galaxy, S-max,Mondeo,Focus C-Max, Transit and Custom (from 2018), etc Specification Fork width: 19mm Connection thread: M18x1.5 Height: 98 mm Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Injector Extractor Clamp for use on M9R injectors - Requires a hydraulic injector puller such as 185800V2 Applications Double fixing Renault/Nissan, Opel 2.0 dCi Available as part of kits: GO426 - Multi-Stage Injector Puller Kit For M9R 2.0 DCI Engines GO537 - Injector Extractor Kit with 12T Hydraulic Cylinder Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO493 - Bosch Injector Adaptor Injector adaptor designed for Bosch applications, enabling secure connection between the injector and extraction equipment. The double fixing design provides a reliable hold during removal, supporting controlled and efficient injector extraction. Key Features Suitable for Bosch injector applications Double fixing design ensures secure attachment Enables connection to injector puller systems Includes pin (M17x1 – M18x1.5) and bush (M27x0.75) Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Thanks to the extracting bushes the extractors fit precisely to the glow plug seats, providing a perfect removal. Components1 x ⌀ 2.5 mm socket for glow plug removal   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO449 - Slide Hammer Injector Removal Set Slide hammer injector set designed for the removal of diesel injectors without dismantling the injector head. Supplied with a range of adaptors, the system allows injector extraction using multiple methods, providing a versatile solution for different injector types and access conditions. Key Features Suitable for removal of diesel injectors (Bosch, Denso, Siemens) Slide hammer operation provides controlled pulling force Allows removal without dismantling the injector head Multiple extraction methods using pliers, adaptors and specialist socket Includes CR adaptors (M12x1.5 and M14x1.5) for common rail applications Enables injector removal while keeping components intact where possible Method Using the pliers with holding arms perfectly fitting to the shape of the injector Using the articulated joint adapter and the pivot, that has to be screwed to the fitting of the Common Rail duct Using the special socket (for Bosch CR) that ensures the removal of the injector without removing the electrical connection plastic top, the injector remains intact and working after removal. Applications Denso, Bosch, Siemens   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO564 - Installation/Removal Tool for Injector Nozzle- Mercedes RRP £144.15 To dismantle petrol injectors and to install the Teflon gasket For restoring fuel injectors immediately after the calibration of the sealing rings. Puller fork with hole for sliding handle (6 mm) and M8 female thread for slide hammer (not included) Applications: Models: S-Class S550, CL-Class CL550, S-Class Coupe/ Cabriolet S550, CLS-Class CLS550, SL-Class SL550 E-Class E550, M-Class GLE-Class GL450, GL-Class GLS-Class GL550, GLS550 S63 AMG, CL63 AMG. G CLS 63 AMG, ML 63 AMG GLE 63 AMG, GL 63 AMG GLS 63 AMG, E63 AMG, Infiniti Q50 (2.0t), Q60 (2.0t) & QX30 (2.0t) Engine: 4,6 - 5,5 L Mercedes benzina a iniezione diretta Engine code: M133, M152, M157, M270, M274, M276, M278 Injectors: 278 589 00 33 00 272 589 00 43 00 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Tool to removeal Bosch magnetic injectors.  Removal is carried out without partial disassembly, so reuse is ensured.  Allows for the injector to be removed without removing the injector solenoid or internal components.    Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO561 - Injector Removal Kit - Bosch Ducato Diesel Engine 3.0 RRP £205.95 Complete tool for the removal of Bosch Piezo injectors.  Removal is carried out with partial disassembly and this ensures that the injector can be reused.  Appliction: Fiat Ducato 3.0 L Diesel from 2006 Iveco Daily 2.3 L from 2011 to 2014 3.0 L Diesel from 2007 Citroen Jumper 3.0 L HDI from 2010 Peugeot Boxer 3.0 L HDI from 2010    Injectors: 0445116059 0445116019 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO700 - Sockets for NOX and Particulate Sensors Allows professional disassembly and assembly of exhaust particle NOX sensors. The closed 6-point profile allows very high loosening torques, especially with an extremely locked coupling. The special design of the special socket wrench prevents slipping and damage of the socket profile on the sensor. The connection cable is led to the side of the socket and is therefore protected from cuts and incisions. Components: 1 x 24mm Socket  1 x 32mm Socket  1 x 19mm Socket Adapter 1 x 17mm Socket Adapter 1 x 14mm Socket Adapter 1 x 22mm Socket Adapter 1 x 24mm Socket Adapter Technical data: Total length 85 mm 1/2" guide  Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £3491.70   For use with Govoni Spectrum (GO2100Pro or GO2100Pro-X) Combined with SPECTRUM pro and its dedicated functions and strategies, it makes diagnostics, cleaning and flow control of fuel injectors easy, fast and above all within everyone's reach.  Small size - allows the injector test bench to be positioned on a shelf and transportable  Safe both for the environment and for the operator himself, as the use of electricity is not directly required. Possibility to test up to 4 injectors simultaneously Suitable for any petrol injector  Compressed air supply with adjustable pressure from 0 to 5 bar (72.5PSI-500 Kpa) Sliding injector holder rail with quick coupling adjustable in height with taps to be able to open or close the passage of the liquid for each injector Graduated burettes for immediate reading of the injectors flow rate Quick connection burettes Integrated flushing liquid tank with filler cap with maximum capacity of 2000 c.c. (2 liters) Quick release air hose Test bench dimensions L=max454 x H=685 x D=300mm  The configuration consists of: test bench docking station cover Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO414 - Mechanical Injector Extractor Kit - Basic RRP £1068.01 The Govoni GO414 Basic Kit is a high quality mechanical injector removal system, specifically engineered to safely and effectively extract stubborn injectors without causing damage to the cylinder head. Key Features:  Heavy Duty Construction: Durable, professional grade components designed to withstand the high forces required to remove seized or corroded injectors. Universal Application: Compatible with a wide range of common rail diesel engines, including Bosch, Delphi, Denso, and Siemens injectors. Compact and Portable: Supplied in a robust carry case for easy transport and secure storage. Ideal for workshops looking for a reliable, cost effective injector removal solution, or mobile mechanics and technicians requiring a portable tool. Optional Upgrade: GO421 - Injector Adaptor Set - Bosch GO1012 - Hydraulic Cylinder Steel 12 Tonne Ensure smooth injector removal every time with the GO414 Basic Kit, a trusted tool for professionals. Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO563 - Injector Extractor- Bosch M18 x 1.5 RRP £350.15 Complete tool for the removal of Bosch magnetic injectors. The half-shells of the tool head are positioned directly under the screw ring of the injector electrical connection. The locking sleeve with window provides a non-slip grip. Removal is carried out without partial disassembly and this ensures that the injector can be reused. Application: Universal for diesel engines of many manufacturers Technical data: Connection internal thread M18x1.5 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

To loosen and tighten fuel filters and oil filters. The wrench is equipped with 2 extension half-shells (toothed on the inside), which are attached directly to the jaws of the filter wrench and can be secured in place. It can be used with or without extensions. Can be used for filters with and without guide profiles Ø 60-80 with extension   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

The two head supports are implemented with non-scratch plastic material and are adjustable from 0 to 30°. There are two handles for locking when the right inclination is set. It is also possible to regulate the horizontal position of the head moving the pins to the opposite holes up and down. There is a long regulation also for the push rod in case of deep valve chambers. The frame can be rotated 30° on both sides. Can also be regulated forward and backwards. In case of valves locked hard into the seat, hit the slide hammer on the top with a plastic mallet. The bench is also provided with a travel limit device that guarantees the same stroke for each valve. When the valve spring is compressed, the operator can block the position using the opposite pin. Consequently you can work on the valves having both hands free. Technical data: Dimensions: 785x500x625 mm Stroke: 265 mm Cylinder head: 750 mm Length: min. 185 mm Inclination angle = 0° - 30° Total weight: 25,5 Kg Application: Cars and commercial vehicles Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

Set of special tools to remove the injector on Ford vehicles Provides removal of heavily seized injectors in a professional, safe and fast way Non-seized injectors can be removed using the fork and reused as required Includes tools for extraction of injectors in single parts if broken  Injector extraction: Complete extraction of injector with a special fork Advantage: It is not necessary to replace the injector; it can be reused Partial exctraction of injector with special tools included in the set Applications: Ford 2.0 Eco Blue “ engines from 2016 in Galaxy/S-Max/Mondeo/Focus C-Max/Transit and Custom (from 2018) etc. Engine codes: YLFS 77 kW “ YLF6 77 kW “ YMFS 96 kW “ YMF6 96 kW “ YNFS 125 kW “ YNF6 125 kW “ YLR6 77 kW “ YMR6 96 kW “ YNR6 125 kW For particularly tight injectors, do not use the fork extractor, we recommend the use of our hollow piston mechadraulic cylinder of 12 tonnes; GO1015   GO434SP Includes: GO519 Ford Injector Removal Socket Special socket for the removal of injectors Engine code YLFS, YLF6, YMFS, YMF6, YNFS, YNF6, YLR6, YMR6, YNR6 Application Ford 2.0 ecoblue TDCI from 2016 (Ford Galaxy, S-max, Mondeo, Focus C-Max, Transit and Custom (from 2018) etc   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

This tool is universal in use for light and heavy duty diesel engines, and it allows you to professionally re-thread the NOX sensor thread without damaging the exhaust system. - Excellent for cleaning and regenerating threads up to the end of the threaded blind hole.   Technical data Compact design hexagonal drive SW13 and driving shaft Excellent for cleaning and regenerating threads Excellent up to the end of the threaded blind hole. Optimum result thanks to 6 tensioning grooves Material = HSCO   Application Exhaust particle sensors, exhaust temperature sensors, lambda sensors, etc. Nissan, Renault, Bmw, Mini, Citroën, Peugeot, Ford, Hyundai, Kia, Dacia, Mercedes-Benz, Opel, Vauxhall, Suzuki, Iveco   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

This tool is universal in use for light and heavy duty diesel engines, and it allows you to professionally re-thread the NOX sensor thread without damaging the exhaust system. Excellent for cleaning and regenerating threads up to the end of the threaded blind hole.  Technical data Compact design hexagonal drive SW13 and driving shaft Excellent for cleaning and regenerating threads Excellent up to the end of the threaded blind hole. Optimum result thanks to 6 tensioning grooves Material = HSCO   Application Exhaust particle sensors, exhaust temperature sensors, lambda sensors, etc.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

This tool is universal in use for light and heavy duty diesel engines, and it allows you to professionally re-thread the NOX sensor thread without damaging the exhaust system. Excellent for cleaning and regenerating threads up to the end of the threaded blind hole. Technical data Compact design hexagonal drive SW13 and driving shaft Excellent for cleaning and regenerating threads Excellent up to the end of the threaded blind hole. Optimum result thanks to 6 tensioning grooves Material = HSCO   Application Exhaust particle sensors, exhaust temperature sensors, lambda sensors, etc. Mercedes-Benz, Audi, Porsche, Seat, Škoda, Vw, Fiat, Alfa Romeo, Lancia, Bmw, Opel, Chevrolet, Daewoo, Suzuki, Ford, Honda, Toyota, Nissan, Volvo, Citroën, Saab, Subaru, Mazda, Mini, Mitsubishi, Jaguar, Rolls Royce, Bentley, Lexus, Pontiac   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less